No Tooling!
Up to 4 Layers
PDF Version
Omni's low-cost PCB prototyping Service. For boards that meet the standard specs, listed below.
Standard Parameters
One Gerber file per layer, one drill file, no composite layers
Up to 4 layer designs
No Design Rule or error checking
No retained tooling (reruns would have to be retooled)
SMOBC with Immersion White Tin finish
No gold
We can do simple step and repeats of a design into an array
LPI green solder mask 2 sides
White silkscreen on component side
FR4 0.062" thick
0.5 + 0.7 Oz copper, 1 Oz inner layers
Multi Layer build /14/28/14/
Minimum traces 0.008", minimum spaces 0.007"
Minimum hole size 0.016", max hole size 0.187", 10 tool sizes max
All holes are plated
All slots are unplated
Smallest slot width 0.062"
Embedded apertures (RS274X format) or GCPrevue *.gwk save file - software available from www.omnigraph.com
No more than 40 holes per square inch
No UL or ISO certificates can be issued
Price Grid for 2 layers (x 2 for 4 layers)
Panel Size Turn 2 panels 4 panel
5" x 8" 5 days $200 $300
3 days $300 $400
8" x 10" or 5 days $300 $400
3 days $400
Notes
Multi layers are 10 day turns "No Tooling" has no error checking - that means what you get is what you send. An extra editing fee is required for any design change, such as clipping silkscreen, combining multiple gerber layers, etc...
"No Tooling" jobs are 4 point routed, ie a simple rectangle. Multi-board arrays of up to 6 boards would be tabbed to each other for an extra $50. Higher route charges are needed (usually double route charge) for panels with a large number of boards or odd profiles.
Unplated cutouts, slots, non-round holes, and holes larger then 0.187" can be done for an extra charge of $50.00. Plated cutouts can only be done under regular service.
Going beyond std specs, such as 2 silkscreens, 2 Oz Cu, etc... is not possible.
An extra editing fee is required for any changes you ask us to make to your design.
And there is still more!
Receive a credit of $50.00 for 2 layer and $100.00 for 4 layer on the cost of production tooling at Omni
if there are no layout changes and the production order is placed within
30 days of the No Tooling order.
